Home arrow ASTATIC
ASTATIC PDF Print E-mail
  
  AMC105SNO-19
Heavy duty omni directional paging microphone
(one DPDT switch)

 1 DPDT sealed switch
19” heavy-duty gooseneck
2 _” flange
6’ heavy duty cable  
For fixed paging applications such as fast-food restaurants, supermarkets,
gas stations, busing and transportation, commercial facilities and dispatch.
Omni-directional pick up for "forgiving" pick up of users that may
not be focused or "committed" to the mic.
Heavy-duty gooseneck and mounting flange.
High impact resistant Cycolac housing.
Broad rising frequency response tailored for speech intelligibility and
communication.
Switch wired normally open.
Low impedance.
Internal shock mount.  

 

  202R, 202RW
RF Resistant Omni Condenser Mini-Boundary Microphones

 

 

 

 

RF resistant design.
Low profile mounting in panels, table tops, walls or ceilings.
Hemi cardioid directional pick-up pattern.
Dual surface and bottom shock isolation bushings.
Low noise transformerless electronic design.
13/16" (20mm) threaded diameter with mounting hardware.

 

910B, 915B, 920B
Condenser Gooseneck cardioid condenser microphones

 

For: lectern, dais, courtrooms, conference/meeting rooms, House of Worship.
Natural extended fidelity frequency response for versatile applications
in performance and speech.
Unidirectional for rejection of feedback or unwanted ambient sounds.
Silent dual bend point flexpipe on 915B & 920B.
Low noise transformerless electronic design.
Includes foam pop filter.
See Accessories for versatile mounting options. 

      

827A-13, 827A-17
Condenser Gooseneck cardioid condenser mics
827A-13 (13”), 827A-17 (17”)

 
For: lectern, dais, courtrooms, conference/meeting rooms, paging,
telecommunications, intercom systems.
Speech optimized frequency response.
Unidirectional for rejection of feedback or unwanted ambient sounds.
Unique all flex gooseneck design for precise positioning.
Low noise transformerless electronic design.
Includes foam pop filter.
See Accessories for versatile mounting options.

    

611L
Dynamic Omni-directional Palm held microphone

 
For near proximity talking/paging applications in security,
mobile communications, emergency, bus call stations.
Omni-directional pick up for “forgiving” pick up of users that
may not be focused or “committed” to the mic.
Rugged polyester mic element resists effects of extreme temperature,
moisture, most acids, alkaline & solvents.
Molded high impact resistant Cycolac body.
Permanently attached heavy duty, 4-conducter, 2-shielded,
coiled chord with stripped & tinned ends.

 

 Back to Top

 

631L
Dynamic Noise canceling Palm held microphone

 
For close talking/paging applications in security, mobile communications, 
emergency, bus call stations.
360° elimination of background noise and resists feedback.
Soft Curved lip guard to encourage proper spacing for best up-close use.
Rugged polyester mic element resists effects of extreme temperature,
moisture, most acids, alkalines & solvents.
Molded high impact resistant Cycolac body.
Permanently attached heavy duty, 4-conducter, 2-shielded,
coiled chord with stripped & tinned ends.

 

878HL-2
Omni directional, dynamic tabletop paging mic

 
For fixed or temporary paging applications such as industrial & commercial facilities,
education, sports call announcing and dispatch.
Omni-directional pick up for “forgiving” pick up of users that
may not be focused or “committed” to the mic.
Wide smooth frequency response tailored for speech intelligibility and communication.
Momentary or latching Push-To-Talk switch bar.
Selectable PTT (push to talk) or LTT (lift to talk).
7’, four conductor, two shielded cable wired normally open for relay control.
Hi/Lo impedance selector.
Four non-skid, non marring molded “feet”.
Modern styling & heavy duty lightweight construction.

 

119S Series
Heavy-duty cardioid directional paging microphone
(1 DPDT sealed switch)

 
For fixed paging applications such as fast-food restaurants, supermarkets,
gas stations, busing and transportation, commercial facilities and dispatch.
Cardioid-directional pickup for maximum rejection of feedback or unwanted ambient noise.
Should require up-close, focused attention by user.
Available with heavy-duty goosenecks and heavy duty mounting flange.
Solid brass machined head, polished, and chrome plated.
Broad rising frequency response tailored for speech intelligibility and communication.
Low impedance.
Internal shock mount.
Switch wired normaly open.

 

 900, 900W
Hanging overhead choir or conference mics
900 (black), 900W (white)

 
For: Places of Worship, choir, courtrooms, conference/meeting rooms.
Natural extended fidelity frequency response for versatile applications in performance and speech
Unidirectional for rejection of feedback or unwanted ambient sounds.
7” flexpipe at mic end for precision aiming or adjusting.
30’ twist resistant cable terminating in 3-pin XLR connecter.
.022” diameter hole behind mic head allows for precision retention by monofilament line.
Low noise transformerless electronic design.
Includes foam pop filter.
Low noise transformerless electronic design.

 

 GSM-1
Heavy-duty installation shock mount

 
Narrow "footprint" for tight installations.
Hi mass. low volume, for maximum shock absorption.
Custom formulated Impact Noise Resistant (INR) elastomer bushings.
Will not allow the microphone to "sag" or "droop", even when using longer gooseneck microphones.
Internal stop pin protects rubber parts from damage when inserting or removing microphones.
Includes 6’ balanced cable terminating in stripped and tinned ends.
Fits any mini condenser gooseneck mic or other similar mics and attachments with XLR type connecter.
Direct input connection via Switchcraft 3-pin Female XLR type Connector.

 

Wall Plates Connecters
40-347

 
Wall plate with single female 3-Pin panel XLR type connecter.
Connecter mounted on standard duplex wall plate.
Brushed stainless steel duplex plate.
Mounting screws included.

 

Back to Top
 
[ Back ]